Samsung SV-A20GK Service Manual page 14

4-1-5 Chassis removal
1. Remove 2 screws holding the bottom cover.
2. Remove 2 screws holding the frame.
3. Remove 2 screws holding the housing assÕy.
4. Remove 2 screws holding the assÕy full deck.
5. Lift the assÕy full deck up.
6. Release 1 tab holding the connector board assÕy.
7. Release 1 hook holding the assÕy main.
8. Lift the assÕy main up to remove.
Note : 1. When removing chassis, take extreme care not to damage the main PCB front.
2. When reinstalling the deck on the main PCB, take extreme care not to damage the sensor.
Samsung Electronics
3 REMOVE 2 SCREWS
(BH;2-3X12 YELLOW)
A
5 RELEASE 1 TAB
REMOVE 2 SCREWS
2
(BH;2-3X12 YELLOW)
1 1 REMOVE 2 SCREWS REMOVE 2 SCREWS
(BH;2-3X12 YELLOW) (BH;2-3X12 YELLOW)
Fig. 4-5 Chassis Removal
4 REMOVE 2 SCREWS
(BH;2-3X12 YELLOW)
ASS'Y FULL DECK
CONNECTOR BOARD ASS'Y
ASS'Y MAIN
FRAME
6 RELEASE 1 HOOK
BOTTOM COVER
Disassembly and Reassembly
4-5