Operating Instructions - Bushranger PW110 Operator's Manual

OPERATING INSTRUCTIONS

Please Note: This unit is to be connected to a cold water source ONLY.
Please Note: The motor of this pressure washer will NOT run. It will only operate when the trigger is
squeezed.
• Connect the outlet hose to the washer and connect the spray gun to the outlet hose.
• Connect nozzle and nozzle extension.
• Check gauze filter is clear of any blockage.
• Connect the water supply hose.
• Check that the hose has no kinks in it.
• Turn on water and check for leaks.
• Depress trigger to allow air to be expelled though the pump and hoses, lock trigger.
• Plug in machine and turn on switch.
• Unlock trigger and use the pressure washer.
SHUT DOWN
• Turn off the motor (turn switch to the off position).
• Unplug the unit from the power source.
• Turn off the water supply.
• Press the trigger of the gun to depressurize the system.
• Disconnect the garden hose from the pressure washer.
• Wipe all surfaces of the unit with a damp clean cloth.
• Engage the gun safety lock.
Caution:
• ALWAYS turn off the unit's motor BEFORE turning off the unit's water supply. Serious damage could occur to the motor
if the unit is run without water.
Caution:
• NEVER disconnect the high-pressure discharge hose from the machine while the system is still pressurized. To
depressurize the unit, turn off the motor, turn off the water supply and squeeze the trigger 2-3 times.
7