Electric Connection - Beko GN1416221ZX User Manual

Installation
To adjust the doors vertically,
Loosen the fixing nut located at the bottom.
Rotate the adjusting nut according to the position
of the door (clockwise/counter-clockwise).
Tighten the fixing nut in order to fix the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the top.
Rotate the side adjusting nut according to the
position of the door (clockwise/counter-clockwise).
Tighten the fixing nut which is at the top in order to
fix the position.

3.4 Electric connection

A
WARNING:
extension cables or multi-plugs.
B
WARNING:
be replaced by the Authorized Service
Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
• Our company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
• Power cable plug must be within easy reach
after installation.
• Connect your refrigerator to a grounded outlet
rated for a voltage value of 220-240V /50 Hz.
Outlet shall have 10 to 16A fuse.
• Do not extension cords or cordless multiple
outlets between your product and the wall
outlet.
9 / 25 EN
adjusting nut
fixing nut
fixing nut
adjusting nut
Do not make connections via
Damaged power cable must
Refrigerator / User Manual