Appendix A: Intel Onboard Sata Raid Configuration; Set Intel Onboard Sata Raid In Efi Mode Mode; Enabling Intel Onboard Sata Raid; Creating A Raid Volume - Acer Altos T110 F4 Installation & Configuration Manual

Altos T110 F4 Installation Configuration Guide
APPENDIX A: INTEL
ONBOARD SATA RAID
CONFIGURATION
Set Intel Onboard SATA RAID in EFI Mode
Please enter BIOS Setup during POST
1.
Please select Boot Options.
2.
You would see below information.
3.
Boot Mode
NOTE. The default setting is DUAL.
To enable EFI mode, please keep Boot Mode as UEFI. To
4.
enable Legacy mode , please change Boot Mode as Legacy.
Please save the setting and exit from BIOS Setup.
5.

Enabling Intel Onboard SATA RAID

1. Please enter BIOS Setup during POST
2. Please select Advanced.
3. Please select SATA Configuration.
4. You might see below information:
SATA Mode
5. Please change the setting of SATA Mode from AHCI to
RAID.
SATA Mode
6. Save the setting and exit from BIOS Setup.

Creating a RAID Volume

Please enter BIOS Setup during POST
1.
Load default BIOS settings by press DELETE.
2.
Please select Advanced.
3.
Please select Intel RSTe SATA Controller.
4.
Press Create Raid Volume.
5.
Type in the name of RAID volume.
6.
Select RAID level.
7.
Select desired HDD to create the RAID.
8.
If you using RAID0(Stripe) you can select Strip Size.
9.
Select Capacity.
10.
6
[UEFI]
[AHCI]
[RAID].