OCCLY Blinc User Manual

1. FAMILIARIZE YOURSELF WITH OCCLY.

THE OCCLY SYSTEM INCLUDES BOTH A
DEVICE AND APP.
DEVICE
CAMERAS
SIREN
LED
USB
CHARGING
MIC
MOBILE APP
LED & LIGHT
SENSOR
ALARM
BUTTON
LED
UTILITY
LIGHT
ON/OFF
CAMERA
OCCLY Blinc USER GUIDE
BASIC FUNCTIONS
Before you use your Blinc please charge it fully.
When charging, a faint red light will appear
from inside the units left side window. When
fully charged, and pendant off, this light will
shut off. If your Blinc is on, the red light will
stay on while charging, regardless of charge
level. Allow approximately 2 hours for a full
change.
• To turn on your device, simply press the on/off
button once.
• To turn on/off the utility light press the
power/utility light button on the device or by
selecting the button on the home screen of
the app. To change the brightness of the
utility light, press the power/utility button
again. To turn off press once more.
• To alarm, push the alarm button TWICE
rapidly on the device. Alarm can also be
triggered by tapping the green Occly icon
TWICE rapidly on the app Home or Crime
Map screen.
• To disable the alarm, your 4-digit personal
cancellation code will need to be entered on
the app screen.
• If you have difficulty pairing the Blinc or need
to pair to another phone use the following
procedure:
1. With the Blinc off, hold down the
alarm button and press the powerbutton.
2. While continuing to hold the alarm
button, look for the side lights to flash.
At that time, release the alarm button.
3. Go to your phone's Bluetooth setting
and pair Blinc to your phone.
4. Once paired, hold down the power
button for approximately 6 seconds to
turn off your Blinc.
5. You may now turn the Blinc back on
for use.