Remote Control - Newline-Interactive TC-20P Manual

Remote Control

Button
Power on Visualizer (Press and
hold 3 seconds to turn off).
Setting the Visualizer.
To auto adjust brightness, auto
white balance and auto focus.
Select Visualizer output signal.
Move the cursor Up.
Move the cursor Down.
Move the cursor Left.
Move the cursor Right.
Confirm key.
Capture a still image and
save in flash ROM or SD Card
(Default).
To show or hide the tool bar.
Record a video clip and save in
SD Card (Press it again to stop
recording).
Freeze the image (Press again
to unfreeze).
Re-display stored images and
videos.
Increase brightness.
Decrease brightness.
Control the arm lamp on/off.
Switch between image/text
mode.
Enlarge image size.
Reduce image size.
Function
04
Button Function
Flip the current image (Press
again to normal).
Increase volume.
Decrease volume.
Rotate the image 0°, 90°, 180°,
270°.
Switch between Color mode
and Black & White mode.
Switch output port between
VIDEO OUT and HDMI/VGA
out.
Switch between XGA, SXGA,
WXGA, 720P and 1080P.