Connect To Computer - Newline-Interactive TC-20P Manual

Note
1. Be sure to use the power adapter come with the machine.
2. The type of power adapter and AC cord are depending on your
countries/regions.
3. No wet hands to touch the plug.
4. Be sure to plug the power adapter and AC cord in place.

Connect to Computer

●
Connection via VGA Cable
Step 1: Using VGA cable to connect VGA-IN on visualizer and VGA-OUT on computer.
Step 2: Using audio cable to connect AUDIO-IN on visualizer and AUDIO-OUT on
computer.
Step 3: Using VGA cable to connect VGA-OUT on visualizer and VGA-IN on display
device.
Step 4: Using audio cable to connect AUDIO-OUT on visualizer and external speaker.
Step 5: Pressing Source on remote controller or control panel to switch signal source
to VGA signal.
Note
VGA cable doesn't support audio output. Connecting external speaker to
AUDIO OUT port to have audio output.
12