Specifications - Panasonic LST 116 Installation And Operating Instructions Manual

7.3 Specifications

Lobby Station (VL-VN1900)
Power source Power supply unit (VL-PS240):
24 V DC, 0.6 A
Power Standby: approx. 3.5 W
consumption
Operating: approx. 8.5 W
Dimensions
Approx. 373´179´6
(mm) (height ´
(excluding sections embedded
width ´ depth)
into the wall)
Mass (weight) Approx. 1,500 g
Operating Ambient temperature:
environment
approx. -10 °C to +55 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 8.8 cm (3.5-inch) colour
TFT LCD
Installation Flush mount (using included
method flush mount box)
Image sensor 1/2.7-inch CMOS sensor
(approx. 2M pixels)
Viewing angle Horizontally: approx. 120°
Vertically: approx. 72°
Minimum 1 lx (within approx. 50 cm from
illuminance the camera lens)
required
Lighting method LED lights
IP rating
IP55
IK rating Compliant with IK07
Card reader ISO/IEC 14443 Type A
(RFID)
(MIFARE
(Frequency: 13.56 MHz; RF
transmission power: 42 dBµA/
m (max.) @ 10 m)
Video format H.264 codec
Audio format G.711 codec
Network Ethernet II (DIX)
interface
Network TCP/IP, UDP
protocol
Communication Speed, Duplex AUTO
mode (10BASE-T/100BASE-TX,
FULL/HALF) (Auto negotiation)
*1 Water resistance is only assured if the product is
installed correctly according to the instructions, and
appropriate water protection measures are taken.
*1
®
)
Power Supply Unit (VL-PS240)
The power supply unit is for indoor use only.
Power source Input: 220–240 V AC, 0.2 A,
50/60 Hz
Output: 24 V DC, 0.6 A
Dimensions
Approx. 116´100´54
(mm) (height ´
(excluding protruding sections)
width ´ depth)
Mass (weight) Approx. 230 g
Operating Ambient temperature: approx.
environment 0 °C to +50 °C
Relative humidity
(non-condensing): up to 90 %
Installation Attach to DIN rail
method
Wall mount (using included
screws)
7. Other information
33