Back Of Original Image Appears In Scanned Image; Ripple Patterns Appear In An Image; Image Is Scanned Upside-Down - Epson L395 User Manual

Back of Original Image Appears in Scanned Image

If an image from the back of a thin original appears in your scanned image, try these solutions:
• Place a piece of black paper on the back of the original and scan it again.
• Adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the Advanced Settings tab and adjust the Brightness setting.
• If the Image Type is set to Black & White, select Text Enhancement. If the Image Type is set to
Color or Grayscale, change the Text Enhancement setting to High.
Parent topic:

Ripple Patterns Appear in an Image

You may see a ripple pattern (called a moiré) in scanned images of printed documents. This is caused
by interference from differing pitches in the scanner's screen and your original's halftone screen. To
reduce this effect, adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the Descreening setting.
• Select a lower Resolution setting.
Parent topic:
Related references
Additional Scanning Settings - Advanced Settings Tab

Image is Scanned Upside-Down

Your product scans using the Auto Photo Orientation setting. This setting checks the preview image
for faces, the sky, and other features, and then correctly rotates the photo when it is scanned, if
necessary.
If your photo is not oriented correctly using this option, you can turn Auto Photo Orientation off and
scan again. When Photo Mode is selected, select Thumbnail Options from the Main Settings tab.
Select On or Off and scan your document again.
Note: Auto Photo Orientation will not work when you scan newspapers, magazines, documents,
illustrations, or line art, or images smaller than 2 inches (5.1 cm) on any side.
Parent topic:
Related references
Additional Scanning Settings - Main Settings Tab
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
138