Instructions For Batteries; Front Panel And Peripheral; Connect Peripheral Equipment; Via The Euroconnector - Superior SP 7029/2 User Manual

With remote control
Table of Contents

Advertisement

Available languages

Available languages

FRoNT PANEL AND PERIPhERAL /

coNNEcT PERIPhERAL EqUIPMENT

Instructions for batteries

• Use only batteries of the recommended or an
equivalent type!
• Do not mix different battery types or new and used
batteries!
• When inserting the batteries, follow the polarity
markings!
• Remove the batteries whenever the article is not in
use for a prolonged period of time!
• Remove empty batteries from the article!
• Do not attempt to recharge disposal batteries!
• Rechargeable batteries must be charged under
adult supervision!
• Do not short-circuit the battery terminals!
• Do not throw batteries into the fire!
FRoNT PANEL AND PERIPhERAL
28" ReaR Panel
A
Antenna
B
SCART 1
c
SCART 2
coNNEcT PERIPhERAL EqUIPMENT

via the Euroconnector

Your TV set has two Euroconnector sockets. If you want
to connect peripherals (e.g. video, decoder, etc.) which
have Euroconnectors, to your TV, use SCART1 and
SCART2 inputs.
If an external device is connected via Euroconnector
sockets TV is switched to AV mode automatically.

via Ant Input

If you want to connect to your TV, peripherals like video
recorders or decoders, but the device you want to con-
nect does not have Euroconnector, you should connect
it to the ANT input of your TV set.
If the VCR is connected via antenna input it is suggested
to use the Programme 0.

Tv and video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you also con-
nect a eurocable to EXTERNAL sockets.

Playback NTSc

Connect NTSC VCR player to Euroconnector at the
back of the TV.
Connect NTSC VCR player to RCA Jack at the front of
the TV (optional).
Then, press "
" button to select AV-1, AV-2 or F-AV.

copy Facility

Source selection for VCR recording.
• Select Features Menu in the Main Menu.
• Select AV-2 OUTPUT source pressing "F" or "E"
button.

camera and camcorder

To connect to Front-AV input (F-AV)
Connect your camera or camcorder at the front side of
your TV.
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You should connect the jacks to the input in
the same colour.

connecting headphones

Use the stereo headphone socket (HP) on the lower
front / right side of your TV, to connect headphones.
24

Advertisement

Chapters

Table of Contents
loading

Table of Contents