Remote Unit; Main Unit - Oregon Scientific RAR232 User Manual

TABLE STAND AND WALL MOUNT
The main and remote units can either be positioned on a
flat surface or mounted on a wall.

MAIN UNIT

TABLE STAND
1. Once the battery cover is on, attach the stand through
the battery cover's rectangular slot.
086L002753-209 EN REV1
RAR232 EN OP.indd 4
4/13
2. Ensure that the base of the stand fits into the 2 small
holes at the bottom of the main unit.
3. To remove the stand from the battery cover, press
your finger against the latch in the opening found at
the bottom of the stand as shown in the diagram.
4. Pull the stand out in a downward motion to release.

REMOTE UNIT

(WALL MOUNT)
4
(TABLE STAND)
C F RESET CH 1 2 3
12/22/05 4:31:34 PM