Gater G427 Product User Manual page 4

INSTALLATION
Installation diagram
The video signal is transferred from the camera to the G427 monitor via an RCA cable that will need
to be run through the boot, through the passenger compartment to the mirror monitors wired loom run
under the dash. From there the power and video signals are sent directly to the monitor. At the rear of
the car the camera is powered directly from the reversing tail light. Priority is the AV2 input.
+
Monitor Powerwires
(ACC)
F M
Moulded
M F
M
F
splitter
F
(Optional front camera)
(Blue wires can
6 Metres
be used for
M
F
additional
Moulded
accessories )
splitter
Powerwires
(Reversing light)
Camera
M
F F
PAGE 4
G427
INSTRUCTION MANUAL