Philips 49HFL7011T User Manual page 9

Network Configuration
If you are an advanced user and want to install your
network with Static IP addressing, set the TV to Static
IP.
To set the TV to Static IP...
1 - Consumer Mode: On  Press  HOME and
select Features and press OK.
Guest Mode: On  Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
2 - Select Wireless and Networks and press OK.
3 - Select Settings > Network Configuration and
press OK.
4 - Select Static IP and press OK to enable Static
IP Configuration.
5 - Press  BACK to go back to previous level.
6 - Select Static IP Configuration and configure the
connection.
7 - You can set the number for IP
Address, Netmask, Gateway, DNS 1, or DNS 2.
8 - Press  BACK repeatedly if necessary, to close
the menu.
Switch On with LAN (WoL)
To switch on WoL...
1 - Consumer Mode: On  Press  HOME and
select Features and press OK.
Guest Mode: On  Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
2 - Select Wireless and Networks and press OK.
3 - Select Settings > Wake on LAN (WoL) and
press OK.
4 - Select On to enable
5 - Press  BACK repeatedly if necessary, to close
the menu.
Switch On with Wi-Fi (WoWLAN)
You can switch this TV on from your smartphone or
tablet if the TV is in Standby. The setting Wake On
Wi-Fi (WoWLAN) must be switched on.
To switch on WoWLAN...
1 - Consumer Mode: On  Press  HOME and
select Features and press OK.
Guest Mode: On  Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
2 - Select Wireless and Networks and press OK.
3 - Select Settings > Wake on
Wi-Fi (WoWLAN) and press OK.
Wake on LAN (WoL).
4 - Select On to enable Wake on
Wi-Fi (WoWLAN) .
5 - Press  BACK repeatedly if necessary, to close
the menu.
Switch on Wi-Fi connection
You can switch on or off Wi-Fi connection on your
TV.
To switch on Wi-Fi...
1 - Consumer Mode: On  Press  HOME and
select Features and press OK.
Guest Mode: On  Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
2 - Select Wireless and Networks and press OK.
3 - Select Connect to Network and press OK.
4 - Select Connect and press OK.
5 - Select Wireless and press OK.
6 - Press  BACK repeatedly if necessary, to close
the menu.
Digital Media Renderer - DMR
If your media files do not play on your TV, make sure
that the Digitial Media Renderer is switched on. As a
factory setting, DMR is switched on.
To switch on DMR...
1 - Consumer Mode: On  Press  HOME and
select Features and press OK.
Guest Mode: On  Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
2 - Select Wireless and Networks and press OK.
3 - Select Features > PTA and press OK.
4 - Select Digital Media Renderer - DMR and
press OK.
5 - Select On and press OK.
6 - Press  BACK repeatedly if necessary, to close
the menu.
Switch on Wi-Fi Miracast
Switch on Wi-Fi Miracast to share the screen of your
smartphone, tablet or computer on the TV.
To switch on Miracast...
1 - Consumer Mode: On  Press  HOME and
select Features and press OK.
Guest Mode: On  Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
9