Page 1
CAME-SINGLE User Manual V1.2 CAME-TV Customer Support Email From Americas: americas@came-tv.com From Outside Americas: europe@came-tv.com Xiamen CAME Photographic Equipment Co.,Ltd Tel:+86-592-6283638 Monday to Friday 9:00~18:00 (GMT+8) www.came-tv.com...
The CAME- Single has been calibrated before it [2] Battery Indicator leaves the factory. No modi cation or amendment to the CAME-Single is allowed or needed. Green--full battery As CAME- TV has no control over customer use, setup, nal assembly, modi cation or misuse, no liability shall Yellow--Alert power enough be assumed nor accepted for any resulting damage or injury.
Contents After the balance, you need rotate it to ensure the Pitch motor does not get stuck. If the vertical balance needs any necessary adjustment, you may need to balance the pitch axis fore and aft until the camera stays level at any pitch angle. Disclaimers and Warnings Gimbal description Step 4: Balancing the Yaw Axis...
Packing List Main gimbal body x 1set Gimbal Handle x1 Fixed Pitch Adjustable Screw Plate Step 2: Balancing the Roll Axis 1. Loosen the adjustable screw on the xed plate, to balance the camera (left or right). Quick Release Plate x1 Battery Charger 2.
Battery Preparation Camera Installation The gimbal comes with a built-in battery, please charge before usage. 1. Attach the quick release plate to your camera using the 1/4" screw,make the adjustment according to the 1. Connect the charger adapter with socket. camera center of gravity.