Table of Contents
Advertisement
Chapter 3: Installation
3.1 General
3.2 Inspection and
Unpacking
3.3 Rear Panel
Definition
This chapter provides general installation instructions for the Model 425 gaussmeter.
Please read this entire chapter before installing the instrument and powering it on to
ensure the best possible performance and to maintain safety. For instrument operat-
ing instructions, refer to Chapter 4 and Chapter 5. For computer interface installation
and operation refer to Chapter 6.
Inspect shipping containers for external damage before opening them. Photograph
any container that has significant damage before opening it. Inspect all items for
both visible and hidden damage that occurred during shipment. If there is visible
damage to the contents of the container, contact the shipping company and
Lake Shore immediately, preferably within five days of receipt of goods, for instruc-
tions on how to file a proper insurance claim. Lake Shore products are insured against
damage during shipment, but a timely claim must be filed before Lake Shore will take
further action. Procedures vary slightly with shipping companies. Keep all damaged
shipping materials and contents until instructed to either return or discard them.
Open the shipping container and keep the container and shipping materials until all
contents have been accounted for. Check off each item on the packing list as it is
unpacked. Instruments themselves may be shipped as several parts. The items
included with the Model 425 are listed below. Contact Lake Shore immediately if
there is a shortage of parts or accessories. Lake Shore is not responsible for any miss-
ing items if not notified within 60 days of shipment.
If you need to return the instrument for recalibration, replacement or repair, a return
authorization (RMA) number must be obtained from a Lake Shore representative.
Refer to section 8.9.3 for the Lake Shore RMA procedure.
Probes are shipped in cardboard containers and are often included in the instrument
shipping carton. Please retain the probe container for probe storage. This will help
protect the delicate probe from being damaged.
Items Included with Model 425 gaussmeter:
1 Model 425 gaussmeter
D
1 Model 425 user's manual
D
1 I/O mating plug
D
Zero gauss chamber
D
1 line power cord
D
1 line power cord for alternative voltage*
D
* Included only when purchased with VAC-120-ALL power option.
This section provides a description of the Model 425 rear panel connections. The rear
panel consists of the probe input socket, auxilliary I/O socket, B-type USB
connector, and the line input assembly (FIGURE 3-1). Refer to section 8.7 for rear
panel connector pin-out details.
Always turn off the instrument before making the auxiliary I/O connection.
3.1 General
21
|
www.lakeshore.com
Advertisement
Table of Contents
