Neilsen BDE3500E Original Instructions Manual page 20

2. Set the engine speed lever at the
position.
3. Pull out the recoil starter handle.

Pull out the handle until you feel the
resistance, then return it back to the
initial position.

Press down the decompression lever.
It will return automatically when the
recoil starter is pulled.

Pull out the recoil starter handle briskly
with both hands.
 Do not allow the handle grip to snap back against the engine. Return it gently to
prevent damage to the starter.
 When the engine is difficult to start in cold weather, remove the screw plug from the
cylinder head cover and add 2cc engine oil.
 Always screw on the screw plug on the cylinder head cover except filling,
to prevent the rain and dirty flowing into the engine body. Otherwise the quick wear of
the internal parts and other serious problems will result.
Engine speed lever
Photo shows RUN position
CAUTION
CAUTION
Decompression lever