JVC AV-27F577/R Service Manual page 18

4.6.3.2 TV-MICRO SERVICE MODE
1. Adjust
SETTING ITEM No.
SETTING ITEM
S001 BRIGHT
NTSC 43-4:3
SIGNAL SYSTEM SCREEN MODE VIDEO STATUS
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
NTSC : 525i (Composite / S-video input)
525I : 525i (Component input)
D525I : ATSC 525i
D525P : ATSC 525p
D750P : ATSC 750p
D1125I : ATSC 1125i
(2) SCREEN MODE
State of the ASPECT is displayed.
43-4:3 : 4 : 3 (Input signal 4 : 3)
43-16:9 : 16 : 9 (Input signal 4 : 3)
16-16:9 : 16 : 9 (Input signal 16 : 9)
16-4:3 : 4 : 3 (Input signal 16 : 9)
16-ZOOM : HD ZOOM (Input signal 16 : 9)
(3) VIDEO STATUS
State of the VIDEO STATUS is displayed.
STANDARD : STANDARD
DYNAMIC : DYNAMIC
THEATER : THEATER
GAME : GAME
(4) WHITE BALANCE
State of the WHITE BALANCE is displayed.
H : HIGH
L : LOW
(5) SETTING ITEM NAME
Setting item name are displayed. For the setting item names
to be displayed, refer to "INITIAL SETTING VALUE OF
SERVICE MODE".
1-18 (No.YA387)
SETTING VALUE (DATA)
064
STANDARD L
WHITE BALANCE
(6) SETTING ITEM NO.
Setting item numbers are displayed. The setting item numbers
to be displayed are listed below.
Item No.
S001 - S045 Video system setting
D001 - D033 Deflection system
F001 - F003 Factory system setting
SELECTION OF SETTING ITEM
• [CH+] / [CH-] key.
Change the setting items up/ down.
S001... ↔ D001... ↔ F001...↔ S001...
• [SLEEP TIMER] key.
Switch to the next items.
S001 → D001 → F001 → S001
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
CHANGE OF SETTING VALUE (DATA)
• [VOL+] / [VOL-] key.
Change the setting values up/down.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing
[MUTING] key.
Setting item