Receive A Phone Call - Philips DC350/37 User Manual

Disconnect a device
1
Press and hold
• To disconnect, you can also turn off the connected device or move it
beyond the communication range.
• The Bluetooth indicator turns off.
Re-connect a previously-connected device
Tip
•
For a previously-connected iPhone which Bluetooth function is enabled, once it is docked in this
unit, it re-connects automatically.
1
Turn on the main unit.
2
On the device, set up the Bluetooth connection:
Enable Bluetooth to search for other Bluetooth devices. (Refer to the
a
device user manual on how to enable the function.)
When " PHILIPS DC350" is recognized and displayed, select it to start to
b
connect.
3
Wait until the Bluetooth indicator turns on.
Re-connection is completed.
»

Receive a phone call

Note
•
You can receive phone calls through this unit with devices that support the HFP or HSP profi le.
1
Connect the Bluetooth device. (see 'Connect with a Bluetooth device' on page 21 )
2
When a call is received, you hear the incoming call alert tone. Press PAIRING to
accept the call.
• To reject the call, press
3
Speak into the MIC located on the front panel.
• To increase or decrease the volume, press
• To mute the microphone, press
• To select to hear the audio from the device or from the main unit, press
PAIRING .
4
Press to end the call.
EN
22
for more than 5 seconds
.
MUTE . To unmute, press this button again.
VOL +/- .