Table of Contents
Advertisement
To power ON the unit when it is already installed in a powered display:
1. Press and hold the POWER button until the POWER LED becomes illuminated.
Power OFF
1. The OPS-DRD unit can be powered OFF by pressing and holding the POWER BUTTON
until a message indicating device shutdown appears on the display.
Sleep / Wake
1. The OPS-DRD unit can be put to SLEEP from a powered ON state by quickly pressing and
releasing the POWER button. The display will immediately go black and the POWER LED
will turn OFF after a short period.
2. The OPS-DRD unit can be commanded to WAKE from a SLEEP state by quickly pressing
and releasing the POWER button. The display will immediately return to displaying what
was displayed when the unit was placed into the SLEEP state. In addition, the POWER
LED will turn ON.
Unit Reset
1. The OPS-DRD unit can be reset by pressing and holding the RESET BUTTON until the
display goes dark. The unit will begin booting upon release of the RESET BUTTON.
Restore Factory Defaults
Caution!
RESTORING FACTORY DEFAULTS WILL CAUSE ALL INSTALLED APPLICATIONS, DATA AND
SETTINGS TO BE LOST. BACKUP ALL IMPORTANT DATA BEFORE CONTINUING.
1. Open the Settings application and click on the "Backup & reset" menu item.
2. Select "Factory data reset" and the pop-up below will be displayed.
3. Check the "Erase SD card" box.
4. Click "Reset tablet" button
OPS-DRD USERS MANUAL
v2014-11-21
18 |
P a g e
Advertisement
Table of Contents
