Play From An External Device - Philips DC320 User Manual

2
Press SOURCE repeatedly to select iPod/iPhone source.
»
The connected iPod/iPhone plays automatically.
• To pause/resume play, press
• To skip to a track, press
• To search during play, press and hold
resume normal play.
• To go back to previous iPod/iPhone menu, press
scroll through the menu, press PRESET +/-. To confirm a
selection, press OK/
»
If no key is pressed for more than 10 seconds,
back as the play/pause key.
Charge the iPod/iPhone
When the unit is connected to power, the docked iPod/iPhone begins to
charge.
Tip
•
For certain iPod models, it may take up to a minute before the charging indication
appears.

Play from an external device

You can also listen to an external audio device through this unit.
1
Press SOURCE repeatedly to select MP3 link source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the back of the unit.
• the headphone jack on an external device.
3
Start to play the device (see the device user manual).
.
/ .
/
.
, then release to
MENU. To
OK/
acts
EN 17