Pruveeo F5 User Manual
Hide thumbs Also See for F5:

Advertisement

PRUVEEO
USER MANUAL
1
© 2016 PRUVEEO All Rights Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pruveeo F5

  • Page 1 PRUVEEO USER MANUAL © 2016 PRUVEEO All Rights Reserved.
  • Page 2 5. The dash cam supports the Micro SD card from 8GB to the highest 32GB, Class 10 only. 6. Adjust the position of the lens to ensure that you correctly record what you want. © 2016 PRUVEEO All Rights Reserved.
  • Page 3 Once the car turns off, the unit will automatically stop recording. Please note that your vehicle’s Cigarette Lighter Sockets do not have any power when the ignition is switched OFF. © 2016 PRUVEEO All Rights Reserved.
  • Page 4 20. Please format TF card in the device firstly if you use new TF card in the first time, then you can use. 21. Read/write life cycles of the most Micro SD card are considerably shorter at 3,000 to 5,000 cycles per cell. © 2016 PRUVEEO All Rights Reserved.
  • Page 5 4. REC video record key / Up key 5. MIC audio record key / Down key 6. REC led 7. Power led 8. WiFi Led 9. USB slot 10. Microphone 11. TF Card Slot 12. Reset key © 2016 PRUVEEO All Rights Reserved.
  • Page 6 Audio record / Down In the menu options, select the downward function button. If dash cam stops working, long press the reset Reset key button to reset the dash cam. © 2016 PRUVEEO All Rights Reserved.
  • Page 7 [Menu / Mode] key to exit menu settings. Resolution: Set the video screen size, the higher the resolution is, the greater the video screen size will increase, so does the storage space it occupies, we recommend using 1280x720. © 2016 PRUVEEO All Rights Reserved.
  • Page 8 'OFF' to record video in silent mode. Date Label: select 'Open' to add watermark of time while recording, so date and time will display on the playback video. Select 'OFF' to ignore the relevant information. © 2016 PRUVEEO All Rights Reserved.
  • Page 9 3. Search for a Wi-Fi hotspot on your smart phone/tablet, select the network and you will be prompted for a password; enter “12345678” to proceed 4. Once connected the camera’s LCD will enter sleep mode 5. Open the “Goplus cam” application © 2016 PRUVEEO All Rights Reserved.

Table of Contents

Save PDF