Advertisement
• DO NOT use on an infant, invalid or on a sleeping or unconscious person. DO NOT use on
insensitive skin or on a person with poor blood circulation.
• This appliance should NEVER be used by any individual suffering from any physical ailment
that would limit the user's capacity to operate the controls or who has sensory deficiencies in
the lower half of their body.
• NEVER use directly on swollen or inflamed areas or skin eruptions.
• If you feel any discomfort whilst using this appliance, discontinue use and consult your doctor.
• This is a non-professional appliance, designed for personal use and intended to provide a
soothing massage to worn muscles. DO NOT use as a substitute for medical attention.
• DO NOT use before going to bed. The massage has a stimulating effect and can delay sleep.
• Do not use for longer than the recommended time.
PRODUCT FEATURES:
Cushioning micropedic™ beads add
comfort and support.
Heat Button
Activates Heat
Power Button
Activates massage
Heat
Mild and comfortable heat
relaxes overworked muscles
4
Strong Massage Action
Rejuvenates neck and
shoulder muscles
Customized Wire Frame
Contours to fit your neck
INSTRUCTIONS FOR USE:
Adaptor Instructions
1. Insert adaptor plug into the control pad. (Figure 1)
This unit incorporates a wire frame allowing you to contour the unit
to your neck. (Figure 2)
2. Plug into a 230V mains outlet.
3. Place massager on your neck and mould the wire framing to
desired position. (Figure 2)
4. To activate the massage action, press the massage button on the
control pad. (Figure 3)
5. Press once for high speed, a second time for low, and press again
to turn the unit off.
6. To activate the heat function, with massage running, press the
heat button on the control pad. (Figure 3) The LED illuminator will
glow red.
7. To turn off the heat function, simply press the heat button again.
NOTE: Heat is a mild, comfortable heat.
Optional Battery Instructions
Please note: Batteries will only operate the massage function.
You must use the adaptor to activate the heat function.
1. Locate the zip on the back of the unit.
2. Unzip to expose the battery compartment, remove lid. (Figure 4)
3. Insert 4 "AA" batteries. (Proper battery orientation is noted inside
the battery compartment housing.)
4. Replace the cover and zip the back portion back up, making
sure both zipper ends are touching each other to ensure the zip
is closed properly.
5. To activate massage, follow steps 2 – 5 from adaptor instructions.
Battery Precautions
• Use only the size and type of batteries specified.
• When installing batteries, observe proper +/- polarities.
Incorrect installation of batteries may cause damage to the unit.
• Do not mix different types of batteries together (e.g., alkaline with
carbon-zinc or old batteries with new ones).
• If the unit is not going to be used for a long period of time, remove
batteries to prevent damage due to possible battery leakage.
(Figure 1)
(Figure 2)
(Figure 3)
(Figure 4)
5
Advertisement
