Related Manuals for Velex VX301
Summary of Contents for Velex VX301
- Page 1 VX301 Instruction Manual Digital Vehicle DAB+ Digital Radio with FM Transmitter & Bluetooth Hands-Free MODE TX/SCAN PRESET PWR/MENU www.velextech.com...
-
Page 2: Safety Instruction
Safety Instruction Warning Do not expose this radio to rain or moisture. Obey local traffic laws and do not use whilst driving. Clean with a dry cloth. Do not block any ventilation openings. Do not use near heater vents. Use accessories provided by manufacturer. Do not leave your radio where excessive heat could cause damage. -
Page 3: Controls And Connectors
Controls and Connectors MODE TX/SCAN PRESET PWR/MENU (Front) Power on/off Switch|MENU Power Supply Cable Socket (Back) 3.5mm Line in 3.5mm Line out Mode button TX/SCAN button PRESET | Answer/Hang up the call CH- button Microphone Antenna Jack LCD Display... - Page 4 Press the VOL Knob to turn on the DAB+ unit, the LCD will display ‘Velex World DAB'. Use 'MODE' button to select DAB mode/Bluetooth/AUX in. 5. For the first time use, you need to scan all the local DAB+ channels by pressing and holding TX/SCAN button for 3 seconds to activate Auto Scan.
-
Page 5: Dab+ Antenna Installation
DAB+ Antenna Installation 1. The antenna should be fitted on the passenger side of the front windscreen. Ensure that there is a 15cm gap at the top of the antenna film and a 5cm gap from the side of the windscreen to the vertical strip of the antenna film as shown. 2. - Page 6 Selecting Audio through Built-in Speaker / 3.5mm AUX out 1. When the unit is turned on, press the MENU (VOL KNOB) to enter menu mode. Rotate the VOL KNOB and scroll to 'Speaker Setting', select and confirm by pressing MENU again. Select Built-in Speaker and confirm by pressing the MENU.
-
Page 7: Dab+ Service Information
DAB+ Search 1. Press the MODE button until DAB mode is found. 2. Press 'TX/SCAN' button to scan the available DAB+ channel. The scanning progress will takes around 20-30 seconds. 3. To view DAB+ stations in a list, press the PRESET button. Use the Tuning Knob to scroll up or down to select the desired DAB+ channel from ' Service List' and press the MENU again to confirm the selection. -
Page 8: Preset Stations
2. From your smartphone, turn on Bluetooth and search for Bluetooth peripherals. A list of available Bluetooth peripherals will be displayed. 3. Select 'VELEX BT' in the list and once connection is established, the Bluetooth screen will display Connected and a Bluetooth icon will be shown at the top left of the display. -
Page 9: Colour Settings
Aux In The DAB+ receiver features a 3.5mm Aux-In Jack on the right hand side. External analogue audio source from an iPad, iPhone, iPod, Tablet, Android phone or MP3 player etc. can be fed wirelessly through the FM transmission into your car stereo audio system. -
Page 10: Factory Reset
Factory Reset 1. Press MENU button. 2. Use the Tuning Knob to scroll to Factory Reset and confirm by pressing the MENU button again. 3. Use the Tuning Knob to select YES or NO for the reset and confirm by pressing the MENU button. -
Page 11: Technical Specifications
Technical Specifications Radio DAB/DAB+ Frequency Ranges DAB Band III 174-240MHz FM Transmitter 87.5-108MHz Power Supply Micro USB 5V Antenna Power Supply 5V, 1.5A Bluetooth Version 2.1 Built-in Speaker 1.0W 8 ohm Output Connectors 3.5mm Stereo Jack for Audio Dimensions 82 x 80 x 16 mm Net Weight 285 g Information in this user manual is subject to change without prior notice.