6 Other features
Set alarm timer
In standby mode, you can set two alarms to
ring at different time.
Make sure that you have set the clock
Press and hold AL1 / AL2 for two seconds
to activate alarm setting mode.
The hour and minute digits begin to
Press / and
the hour and minute.
Press AL1 / AL2 to conÀ rm.
Select alarm source
For alarm sound, you can select buzzer, your
last listened radio chanel, or latest played
audio in your iPod/iPhone.
Adjust AL1/2 RADIO·BUZZ·DOCK control
to select alarm source for both alarms.
When alarm time comes, the selected radio,
buzzer, or iPod/iPhone turns on.
If iPhone is selected as alarm source, while
no iPod/iPhone is connected, the clock radio
switches to buzzer source instead.
Activate/deactivate alarm timer
Press AL1 / AL2 to view alarm settings.
Press AL1 / AL2 again to activate or
deactivate the alarm timer.
The alarm icon appears if alarm timer
is on and disappears if it is off.
repeatedly to set
To stop the ringing alarm, press the
corresponding AL1 / AL2 .
The alarm repeats ringing for the
When alarm sounds, press SNOOZE .
The alarm snoozes and repeats ringing
nine minutes later.
To adjust alarm interval (in minutes), press
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
When the sleep timer is activated,
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] (off) appears.
Play audio from an external
You can listen to audio from an external device
through this clock radio.
Connect the MP3 link cable to:
MP3 LINK socket.
the headphone socket of an external
Press MP3 LINK to select MP3 link source.
Start to play the external device (see the
user manual of this device).
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.