Black Max BM25TEC Operator's Manual

Black Max BM25TEC Operator's Manual

25.4cc combo

Advertisement

Available languages

Available languages

OPERATOR'S MANUAL
MANUAL DEL OPERADOR
25.4cc TRIMMER/EDGER
COMBO
JUEGO COMBINADO RECORTADORA/
RECORTADORA BORDES 25.4 cc
BM25TEC
Do not use E15 or E85 fuel in this product. It is a violation of federal law and will
damage the unit and void your warranty. Only use unleaded gasoline containing up
to 10% ethanol.
No utilice combustibles E15 o E85 con este producto. Esto constituye una violación a la ley federal, dañará la
unidad y anulará la garantía. Use únicamente gasolina sin plomo con un contenido de hasta 10 % de etanol.
Your trimmer/edger combo has been engineered and manufactured to our high standard for dependability, ease of opera-
tion, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Su juego combinado recortadora/recortadora bordes de mochila ha sido diseñado y fabricado de conformidad con nuestras
estrictas normas para brindar fiabilidad, facilidad de uso y seguridad para el operador. Con el debido cuidado, le brindará
muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA:
antes de usar este producto.
GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS
NOTICE
Para reducir el riesgo de lesiones, el usuario debe leer y comprender el manual del operador
To register your Black Max product,
www.blackmaxtools.com
Para registrar su producto de Black
www.blackmaxtools.com
AVISO
please visit:
Max, por favor visita:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BM25TEC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Black Max BM25TEC

  • Page 1 To register your Black Max product, please visit: www.blackmaxtools.com Para registrar su producto de Black Max, por favor visita: www.blackmaxtools.com OPERATOR’S MANUAL MANUAL DEL OPERADOR 25.4cc TRIMMER/EDGER COMBO JUEGO COMBINADO RECORTADORA/ RECORTADORA BORDES 25.4 cc BM25TEC NOTICE AVISO Do not use E15 or E85 fuel in this product. It is a violation of federal law and will damage the unit and void your warranty.
  • Page 2 See this fold-out section for all of the figures referenced in the operator’s manual. Consulte esta sección desplegable para ver todas las figuras a las que se hace referencia en el manual del operador. Fig. 1 L - On/stop switch (interruptor de encendido/ apagado) M- Muffler (silenciador) A - Edger attachment (accesorio para cortar...
  • Page 3 Fig. 5 Fig. 8 Fig. 11 A - To increase depth (para aumentar la profundidad) A - Cut-off blade (cuchilla de corte) B - Adjusting knob (perilla de ajuste) B - Dangerous cutting area (área peligrosa de C - Wheel arm (brazo de la rueda) corte) D - To decrease depth (para disminuir la C - Direction of rotation (sentido de rotación)
  • Page 4 Fig. 17 Fig. 19 Fig. 14 A - Line (línea) A - Screw(s) [tornillo(s)] B - Arrows (flechas) B - Cover (cubierta) C - Spark arrestor (parachispas) Fig. 18 D - Muffler cover (cubierta del silenciador) E - Plate (placa) F - Muffler (silenciador) G - Muffler gasket (junta del silenciador) Fig.
  • Page 5 Fig. 24 Fig. 23 Fig. 21 A - Flange washer (arandela de la brida) B - Slots (ranuras) C - Flange (brida) D - Gear case (caja de engranajes) A - 1/2 in. socket wrench (llave de boca tubular A - Hanger cap (tapa de suspensión) de 13 mm [1/2 pulg.]) Fig.
  • Page 6: Table Of Contents

    TABLE OF CONTENTS TABLE DES MATIÈRES / ÍNDICE DE CONTENIDO  Introduction ..................................2 Introducción  General Safety Rules ..............................3-4 Reglas de seguridad generales  Specific Safety Rules ................................ 4 Reglas de seguridad específicas  Symbols .................................... 5 Símbolos  Features .................................... 6 Características ...
  • Page 7: General Safety Rules

    GENERAL SAFETY RULES  Do not use on a ladder or unstable support. Stable foot- ing on a solid surface enables better control of the unit WARNING: in unexpected situations. READ AND UNDERSTAND ALL INSTRUCTIONS.  Keep all parts of your body away from any moving part. Failure to follow all instructions listed below may result ...
  • Page 8: Specific Safety Rules

    GENERAL SAFETY RULES  Allow the engine to cool; empty the fuel tank into a con-  We recommend taking your equipment to a qualified tainer approved for gasoline and secure the unit from service center for repair, as service performed by moving before transporting in a vehicle.
  • Page 9: Symbols

    SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates a hazardous situation, which, if not avoided, will result in death or DANGER: serious injury. Indicates a hazardous situation, which, if not avoided, could result in death or WARNING: serious injury.
  • Page 10: Features

    FEATURES PRODUCT SPECIFICATIONS Engine Displacement..............................25.4cc String Trimmer Cutting Width ................................18 in. Line Size ..................................095 in. Edger Blade Length ................................9 in. Edging Depth .......................Adjustable from 1/2 in. to 2-3/4 in. GRASS DEFLECTOR KNOW YOUR PRODUCT See Figure 1. The product includes a grass deflector that helps protect you from flying debris.
  • Page 11 ASSEMBLY  Insert the bolt through the mounting bracket and into the grass deflector. WARNING:  Tighten the bolt securely using a flat blade screwdriver Do not attempt to modify this product or create acces- or 5/16 in. wrench. sories not recommended for use with this product. Any such alteration or modification is misuse and could result JOINING THE POWER HEAD TO THE in a hazardous condition leading to possible serious...
  • Page 12: Operation

    OPERATION FUELING AND REFUELING WARNING: WARNING: Do not allow familiarity with this product to make you Gasoline and its vapors are highly flammable and ex- careless. Remember that a careless fraction of a second is plosive. To prevent serious personal injury and property sufficient to inflict serious injury.
  • Page 13 OPERATION STARTING AND STOPPING WARNING: See Figures 5 - 7. Starting the product differs depending on whether the engine Always position the unit on the operator’s right side. The is cold or warm. Refer to the label on the air filter cover. use of the unit on the operator’s left side will expose the To start a cold engine: user to hot surfaces and can result in possible burn injury.
  • Page 14: Operation

    OPERATION ADJUSTING DEPTH OF CUT  Avoid trees and shrubs. Tree bark, wood moldings, siding, See Figures 11 - 12. and fence posts can easily be damaged by the line.  Stop the engine and disconnect the spark plug wire. USING THE EDGER ATTACHMENT ...
  • Page 15: Maintenance

    MAINTENANCE Normal maintenance, replacement or repair of emission con- CLEANING THE PRODUCT trol devices and systems may be performed by any qualified  Stop the engine and disconnect the spark plug wire. repair establishment or individual with original or equivalent ...
  • Page 16: Idle Speed Adjustment

    MAINTENANCE REPLACING THE SPARK ARRESTOR  Reinsert the muffler assembly and tighten two screws to engine (torque to 60 in.lb (6.78 Nm) minimum, 80 in.lb. See Figure 14. (9.04 Nm) maximum).  Reinstall the cover on the tool and fasten with the five WARNING: screws (torque to 16 in.lb (1.81 Nm) minimum, 22 in.lb.
  • Page 17 MAINTENANCE  Install the hex bolt into the opening on the drive shaft and secure using the hex-shaped opening in the knob WARNING: to tighten. Turn counterclockwise to tighten. The cutting attachment should never turn at idle. Turn NOTE: Only use the knob to tighten the bolt. The use of the idle speed screw counterclockwise to reduce the other tools may allow overtightening of the bolt, which idle RPM and stop the cutting attachment, or contact a...
  • Page 18: Maintenance

    MAINTENANCE STORING THE ATTACHMENT to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.  Store the attachment indoors in a dry, well-ventilated  Abide by all ISO and local regulations for the safe storage place that is inaccessible to children. and handling of gasoline.
  • Page 19: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION 1. No spark. 1. Clean or replace spark plug. Reset spark plug gap. Engine will not start Refer to Spark Plug Replacement earlier in this manual. 2. No fuel. 2. Push primer bulb until bulb is full of fuel. If bulb does not fill, primary fuel delivery system is blocked.
  • Page 20: Warranty

    Adjustments, Ignition, Filters OWT Industries, Inc., warrants to the original retail purchaser that this Black Max brand outdoor product is free from B. Wear items – Bump Knobs, Outer Spools, Cutting Lines, defect in material and workmanship and agrees to repair or Inner Reels, Starter Pulleys, Starter Ropes, Drive Belts, replace, at OWT Industries, Inc.’s, discretion, any defective...
  • Page 21 REGLAS DE SEGURIDAD GENERALES  No utilice la unidad al estar en una escalera o en un soporte inestable. Una postura estable sobre una superficie ADVERTENCIA: sólida permite un mejor control de l’unidad en situaciones LEA Y COMPRENDA TODAS LAS INSTRUCCIONES. El inesperadas.
  • Page 22 REGLAS DE SEGURIDAD GENERALES  Mezcle el combustible al aire libre, donde no haya chispas  Póngase equipo de protección y observe todas las ni llamas. Limpie todo derrame de combustible. Aléjese instrucciones de seguridad. Asegúrese de que el accesorio por lo menos 9 m (30 pies) del sitio de reabastecimiento de de corte deje de girar al tenerse el motor en marcha lenta.
  • Page 23 SÍMBOLOS Las siguientes palabras de señalización y sus significados tienen el objeto de explicar los niveles de riesgo relacionados con este producto. SÍMBOLO SEÑAL SIGNIFICADO Indica una situación peligrosa, la cual, si no se evita, causará la muerte PELIGRO: o lesiones serias. Indica una situación peligrosa, la cual, si no se evita, podría causar la ADVERTENCIA: muerte o lesiones serias.
  • Page 24 CARACTERÍSTICAS CARACTERÍSTICAS ESPECIFICACIONES DEL PRODUCTO Cilindrada del motor ..............................25,4 cc Recortadora Ancho de corte ............................45,7 cm (18 pulg.) Diámetro del hilo ..........................2,4 mm (0,095 pulg.) Recortadora bordes Longitud de la hoja ..........................228,6 mm (9 pulg.) Profundidad del recorte ....................Adjustable entre 13 mm a 70 mm (1/2 pulg.
  • Page 25 ARMADO  Alinee el orificio del tornillo en el soporte de montaje con orificio del tornillo del deflector de pasto. ADVERTENCIA:  Introduzca el perno ranurada a través del soporte de No intente modificar este producto ni hacer accesorios montaje y en el deflector de pasto. no recomendados para la misma.
  • Page 26: Funcionamiento

    FUNCIONAMIENTO ABASTECIMIENTO Y REABASTECIMIENTO ADVERTENCIA: DE COMBUSTIBLE DE LA RECORTADORA No permita que su familarización con este producto le vuelva descuidado. Tenga presente que un descuido de ADVERTENCIA: un instante es suficiente para infligir una lesión grave. La gasolina y sus vapores son altamente inflamables y explosivos.
  • Page 27 FUNCIONAMIENTO Para apagar el motor: ADVERTENCIA:  Suelte el gatillo.  Oprima y no suelte el interruptor de encendido/ apagado Apague siempre el motor antes de reabastecer com- (STOP) la posición hasta que pare el motor. El interruptor bustible. Nunca retire la tapa de combustible ni agregue regresará...
  • Page 28 FUNCIONAMIENTO PARA AVANZAR EL HILO DE CORTE FUNCIONAMIENTO CON EL ACCESORIO PARA RECORTAR BORDES El avance del hilo se controla golpeando levemente el Vea la figura 10. cabezal del hilo contra el pasto mientras el motor funciona a la máxima aceleración. ...
  • Page 29: Mantenimiento

    FUNCIONAMIENTO CONSEJOS PARA RECORTADORA BORDES  Un contacto leve de la hoja contra el borde de la acera, bordillo, etc., es aceptable y no se daña la cortadora de  La cortadora de bordes corta a lo largo de aceras, bordes.
  • Page 30: Reemplazo Del Parachispas

    MANTENIMIENTO REEMPLAZO DEL PARACHISPAS AVISO: Vea la figura 14. Mantener las aberturas de admisión de aire libres de césped y desechos evita que se sobrecaliente el motor ADVERTENCIA: y posibles daños en el motor. Detenga el motor, retire la funda de la bujía y deje que REVISIÓN DE LA TAPA DEL TANQUE DE se enfríen el motor y el silenciador antes de cambiar el supresor de chispas.
  • Page 31 MANTENIMIENTO AJUSTE DE LA MARCHA LENTA  Reemplace el parachispas viejo con el nuevo. Vea la figura 16.  Vuelva a armar el silenciador; para ello, coloque de nuevo las placas y apriete los tres tornillos [a 18 pulglb (2,03 Nm) por lo menos, y a 22 pulglb (2,49 Nm) como máximo.
  • Page 32 MANTENIMIENTO INSTALACIÓN DEL HILO EN EL CABEZAL  Vuelva a colocar la perilla en el carrete. DEL HILO REEL-EASY  Vuelva a colocar la tapa del cabezal del hilo y alinee los ™ pestillos con las aberturas en el cabezal del hilo. Oprima Vea las figuras 17 y 18.
  • Page 33 MANTENIMIENTO ALMACENAMIENTO DEL ACCESORIO corrosivos como las sustancias químicas para el jardín y las sales para derretir el hielo.  Guarde el accesorio dentro en un espacio bien ventilado  Cumpla todos los reglamentos federales y municipales inaccesible a los niños. para el almacenamiento y manejo seguro de la gasolina.
  • Page 34: Corrección De Problemas

    CORRECCIÓN DE PROBLEMAS PROBLEMA CAUSA POSIBLE SOLUCIÓN El motor no arranca 1. No hay chispa. 1. Limpie o reemplace la bujía, según sea necesario. Reajuste la separación interelectródica de la bujía. Consulte la sección Reemplazo de la bujía más arriba en este manual.
  • Page 35: Garantía

    DEL PERÍODO DE GARANTÍA CORRESPONDIENTE DE DOS uso en el exterior de la marca Black Max, sin cargo alguno al AÑOS O NOVENTA DÍAS. DE CONFORMIDAD CON ESTA comprador por concepto de piezas y mano de obra (Centro GARANTÍA, LA OBLIGACIÓN DE OWT INDUSTRIES, INC.
  • Page 36 25.4 cc TRIMMER/EDGER COMBO TRIMMER EDGER COMBO 25,4 cc BM25TEC OPERATOR’S MANUAL MANUAL DEL OPERADOR CALIFORNIA PROPOSITION 65 SERVICE WARNING: For parts or service, contact your service dealer. Please call 1-800-726-5760 or visit us online at www.b lackmaxtools.com for assistance. Be sure to provide This product, its exhaust, and other all relevant information when you call or visit.

Table of Contents

Save PDF