Funkwerk FAC 9400 IP Operation And Installation Manual page 30

Start the Internet Explorer!
At  Extras  Internet options  Connections  Settings you will find the following window:
Select the homepage of the FAC 9400 IP camera and set the IP address of the FAC 9400 IP
camera:
Note:
If a browser connection cannot be established after the IP address has been changed, it might be helpful to
delete the ARP entries by entering "arp –d" in the DOS window of the computer.
Open the Internet Explorer and enter the local address 192.168.128.2, the homepage of the FAC 9400 IP
camera will now be shown. "Login" is activated if you select a random config page and confirm with the "Login"
button.
FAC 9400
01/2013
If a proxy server is used, then it must be bypassed
for local addresses.
Note:
The connection between Explorer
and FAC 9400 IP will be
interrupted during IP address
changes.
The connection has to be re-
established with the Explorer using
the new IP address.
Login:
User:
Password:
30
plettac
cattelp