LEM X300 Owner's Manual

Hide thumbs Also See for X300:

Available languages

Download this manual

Need help?

Do you have a question about the X300 and is the answer not in the manual?

Page 2 4. Il sistema x300..... 3 5. Installazione e collegamenti ..3 IMPORTANTE!!! 1.
Page 3 7. Speciﬁ che tecniche x300 - SPECIFICHE TECNICHE SPECIFICHE DEL DIFFUSORE Alti Driver a compressione da 1” con membrana in titanio Componenti Bassi Woofer da 12” con magnete in neodimio W continui Potenza applicabile W picco (EIA RS-426A) Ohms...
Page 4 3. Connector cables ......5 IMPORTANT!!! 4. The x300 system ....5 The threaded inserts allow only one x300 to be 5.
Page 5 7. Technical speciﬁ cations x300 - TECHNICAL SPECIFICATIONS LOUDSPEAKER SPECIFICATIONS High 1” compression driver with titanium diaphragm Components 12” woofer with neodimuim magnet W continuous Power handling W peak (EIA RS-426A) Ohms 4 / 8 Impedance LP: 12dB/oct. @ 2.5kHz Passive crossover HP: 18dB/oct.
Page 6 FIG. 1 - THE SYSTEM FIG. 2 - INSTALLATION M10 ﬂ ying points Speaker stand adaptor...
Page 7 FIG. 3 - CONNECTION CABLES FIG. 4 - CONNECTION PANEL 4ohm version 8ohm version...
Page 8 FEDERAL COMMUNICATIONS COMMISSION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.