Making Tea; Boiling The Water; Cleaning And Descaling; Eliminating Minor Faults Yourself - Bosch TTA2 Series Instruction Manual

Hide thumbs Also See for TTA2 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9

Making tea

Fig. 5
The preparation of Turkish tea is described
here. Other types of tea may become bitter
due to the long steeping time.
Fill the kettle 2 with water, observe min
and max mark.
Place the kettle 2 on the base 1 and
set the selection button 8 to Boil
Fill the tea filter 5 approx.
tea and insert into the teapot 4.
Place the teapot 4 on the kettle 2.
Switch on the appliance by pressing
down switch 10.
The illuminated ring lights up.
As soon as the water has boiled,
the selection button 8 automatically
switches to Keep warm
The indicator light 9 lights up.
Now fill the teapot 4 with the hot water
and refill the kettle 2 with fresh water.
Place the teapot 4 on the kettle 2 and
the kettle on the base 1.
Set the selection switch 8 to Boil
As soon as the water has boiled,
the selection button 8 automatically
switches to Keep warm
Now the tea from the teapot 4 can
be mixed with the hot water from
the kettle 2 according to taste.
When pouring out tea, press the teapot
lid forwards with your thumb.
Info: The water and the tea are kept warm
by setting the switch to
This saves up to 90% energy.
If the kettle 2 is refilled with fresh water,
first bring the water to the boil and then keep
warm.
Tips
Pour the Turkish tea into the tea filter 5
and briefly rinse with hot running water.
This will remove dust residue from the tea
and improve the taste.
The Turkish tea should be left to steep
for at least 20 min. in order to extract
the full flavour.
Always use up the tea extract in the tea-
pot 4, do not refill with water.
Robert Bosch Hausgeräte GmbH
.
O
full of Turkish
.
N
.
O
.
N
.
N

Boiling the water

Fig. 6
Only water can be heated with the kettle 2.
The lid 7 must always be attached.
Fill the kettle 2 with water, observe min
and max mark.
Set the selection button 8 to Boil
switch on with the switch 10.
The illuminated ring 11 lights up
As soon as the water has boiled,
the selection button 8 automatically
switches to Keep warm
The indicator light 9 lights up.
If the water is not to be kept warm, switch
off the kettle 2 with the switch 10.

Cleaning and descaling

Risk of electric shock!
Before cleaning the appliance, pull out the
mains plug. Never immerse the appliance
in water or clean in the dishwasher.
Do not use a steam cleaner.
Wipe the outside of the appliance with
a damp cloth only. Do not use sharp
or abrasive detergents.
Descale the water jug 2 with vinegar
or a commercially available descaler.
Fill jug 2 with water up to the max mark
and bring to the boil. Then switch off the
appliance, add a little household vinegar
and leave to react for several hours.
Or use descaler according to the manu-
facturer's instructions.
Then rinse the water jug 2 and calci-
fication filter 3 with fresh water.
Attention: Never remove calcification residue
with hard implements, otherwise the seal will
be damaged.

Eliminating minor faults yourself

The appliance is not heating or warming up.
The illuminated ring 11 or the indicator light 9
does not come on.  The overheating pro-
tection system has actuated.
Switch off the kettle 2 with the switch 10
and leave to cool down.
Then the appliance can be switched
on again.
en
and
O
.
N
9

Advertisement

Table of Contents
loading

Table of Contents