Reassembly Of Tuning Pointer - Casio ZD-3 Service Manual

REASSEMBLY OF TUNING POINTER

1. Turn the varicon unclockwise stop position.
2. Set the tuner gear figuer position and fixed the screw.
3. Fixed the tuner chassis on the tuner PCB. (three screws)
4. Set the pointer to the tuner chassis mark position.
5. Fixed the tuner shaft screw A.
Tuner shft
5
Mark
4
3
Pointer
Tuner gear
Tuner chassis
2
Varicon
1
Tuner PCB
Screw A
5