Samsung WS32Z419D8**EU Service Manual page 115

Disassembly & Reassembly
12-1-2 Disassembling the CRT and Chassis
Part Name
Chassis
① Separate the Main chassis from the Front Cabinet.
② Pull the Chassis lifting the fixing clip up.
Notice: Pulling the Chassis by force may damage the clip or
the connector. Pull the Chassis just until the clip comes off
the hole.
① Separate the Speakers, the Side AV Wire, the Front Control
from the Feature Box Board.
② Separate the wire from the Wire fixing holder at
Notice: Since there is a clip to connect the Connector Header
in the Wire Connector, pulling it by force may damage the clip
or the connector. Press the clip down completely and pull the
connector.
① Separate the D-Coil and power cable from the Front Cabinet
and Power Board.
② To separate the power cord, slide the fixing clip and lift the
cable up.
① Separate the CRT Ass'y from the CRT
② Separate the TBC wire, GND, VM and Tilt cables from the
CRT Ass'y sequentially.
12-2
Description
.
Description Photo
Pull the chassis while raising
the clip fixing the Front Cabinet
and the Main PCB.
Samsung Electronics