Kenwood NX-200 Instruction Manual page 23

1
Available only for Analog Conventional operation.
2
Available only for Analog Trunking operation.
3
Available only for NXDN Trunking operation.
4
Can be programmed only on the Selector knob.
5
Available only for NXDN Conventional operation.
6
Can be programmed only on the Auxiliary key and the optional
speaker/ microphone PF1 (orange) key.
7
Available only for Analog Conventional, Analog Trunking, and NXDN
Conventional operation.
8
Available only for Analog Conventional and NXDN Conventional
operation.
9
Can be programmed only on the microphone programmable function
keys.
10 Available only for ON/ OFF operation.
9