Kenwood NX-200 Instruction Manual page 20

h Keypad (keypad models only)
Press these keys to send DTMF tones. These keys can
also be programmed with secondary functions {page 10} if
a programmable function key is programmed as "Function".
i
key
Press to activate its programmable function {page 10}. The
default is Menu.
j
key
Press to activate its programmable function {page 10}. The
default is Zone Up.
k
key
Press to activate its programmable function {page 10}.
l
key
Press to activate its programmable function {page 10}.
m
key
Press to activate its programmable function {page 10}. The
default is Zone Down.
n
key
Press to activate its programmable function {page 10}.
o Universal connector
Connect a speaker/ microphone or headset here {page 3}.
Otherwise, keep the supplied cap in place.
6