Adjusting The Image Position - Epson EB-695WI User Manual

Adjusting the Image Position

You can use the Image Shift feature to adjust the image position without
moving the projector.
This feature is not available if the Zoom option is set to the widest
a
setting.
a Turn on the projector and display an image.
b
Adjust the image size using the Wide and Tele buttons.
After you adjust the image size, the Image Shift screen is displayed
automatically.
c Use the arrow buttons on the projector or remote control to adjust the
image position.
You can shift the image diagonally by pressing any pair of
a
adjacent arrow buttons on the control panel or remote control.
d Press the [Esc] button to close the adjustment screen.
The adjustment screen disappears if no operation is performed after
approximately 10 seconds.
• The Image Shift setting is retained even if the projector is turned off.
a
You need to re-adjust the position if you change the installation
location or angle of the projector.
• You can also use the Settings menu to adjust the Image Shift setting.
63