Color Settings - DJTECHTOOLS Midi Fighter 3D User Manual

Color Settings

The right hand side of the Midi Fighter Utility interface is used for configuring the color of the
arcade rim lighting. You can set the color for both the active (pressed) and inactive (released)
state for each arcade trigger in all four virtual banks.
To choose your color settings first pick a color from the palette tool.

To apply this color to the inactive state click in the outer rim of the desired button.
To apply this color to the active state click in the center of the desired button.
You can change between virtual banks using the four bank buttons above the arcade
buttons.
Once you are happy with your changes you must save them by click the "Send To Midi
Fighter" button.





! 1 1