Calibration Menu Display - ViewSonic PJ-vTouch-10S User Manual

Calibration Menu Display

Indicate status of the stylus pen or the finger touch operation.
[Calibrated] The stylus pen or the finger touch operation is ready to use
[Not calibrated] Cannot use the stylus pen or the finger touch operation
because calibration is not performed, or the trouble shooting is displayed on
Indicate
connection status
of the camera unit
and the computer
Switch to the
troubleshooting
screen
Exit EyeRIS
Perform manual
calibration
Select the "Stylus"
when you use the
stylus pen. Select
the "Finger" when
you use the
Touch Module.
Close EyeRIS Setup Menu.
* The software will continue to run.
It will be displayed when
you detect your software
update. Click here to
update the software.
Perform automatic
calibration
Perform calibration
of the Touch Module
and adjustment by the
adjustment dials A and B.
Select [SINGLE POINTER]
for operation as a mouse.
Select [ MULTI POINTER]
as tapping operation to a
tablet
To active this checkbox of
"disable CPU Idle".
(for version EyeRIS_3.1.7.0
only)
12