Startup The Software - ViewSonic PJ-vTouch-10S User Manual

Startup the Software

Preparation:
• First of all, perform setup according to the user's manual supplied with the
projector or the installation manual supplied with the Interactive White Board Kit
or the Touch Module.
• If the computer and the camera unit are not connected by a USB cable, the
message at right would be displayed on and the software would not be started
up.
1. Double click the EyeRIS icon on the desktop.
Driver installation message is displayed on.
Click "OK" and follow the displayed instructions for the sequel operations.
When driver installation is completed properly, EyeRIS Setup Software is
automatically launched and
EyeRIS setup menu is displayed on the screen.
icon is created in the task tray. Clicking this icon,
11