Settings Backup And Restore, Factory Default - M-Life ML0585-N Owner's Manual

Click Browse button first, you'll be prompted to provide the filename of firmware upgrade
file. Please download the latest firmware file from our website, and use it to upgrade your
repeater. After a firmware upgrade file is selected, click Upgrade button, and the repeater
will start firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
NOTE! DO NOT interrupt the upgrade procedure by closing the web browser or
physically disconnecting your computer from repeater (warranty voids in case of
an interrupted upgrade procedure).
5.

Settings Backup and Restore, Factory Default.

For security reasons, you can backup all repeater settings.
To back up/restore repeater's settings, please follow the instructions below:
Please click Advanced Mode → System Tools → Backup and Recovery and Advanced
Mode → System Tools → Restore Factory Settings located at the web management
interface, then the following message will be displayed on your web browser:
EN
Back up
Browse
20
Owner's manual
Press back up button to save repeater's settings.
Press Browse to pick a previously-saved configuration file
from your computer, and click save to replace current
settings with the uploaded file.
Browse