ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Seat Support...
Connect the lower boom tube with the support
1a.
1
frame.
1b.
Secure the tube and the frame by inserting 4 x
(#2) screws.
Insert 2 x (#1) screws to lock the lower arm tubes
1c.
with the seat support, as shown in image.
2a.
Connect plastic seat with support frame, as shown in
2
image.
2b.
Ensure the corresponding letters that are displayed on
the sides of the frame match up and ensure the pop
pins 'click' allowing the pop-ins to engage securely.
3a.
Align the canopy up with the back of the seat, as
3
shown in image.
Connect the zip and slide it to the end.
3b.
To assemble Swing Frame...
1a.
Insert left leg tube onto left support tube, ensuring that
1
the label 'A' on each tube aligns as per diagram.
Repeat previous step for the right leg tube, ensuring
1b.
that the label 'B' on each tube aligns as per diagram.
22mm screws
D
C
B
B