SAFETY PRECAUTIONS Read all instructions before assembly and use of the swing. Keep instructions for future use. WARNING BEFORE ASSEMBLING THIS SWING, READ AND UNDERSTAND THE INSTRUCTIONS. Never leave the child unattended. Never use this product on an elevated surface, eg. A table. This swing is not intended for prolonged periods of sleeping.
SAFETY PRECAUTIONS Battery Safety Information In exceptional circumstances, batteries leak fluids that can cause a chemical burn injury or ruin your product. To avoid leakage: • DO NOT mix old and new batteries or batteries of different types: alkaline, standard (carbon zinc) or rechargeable (nickle-cadmium).
Page 4
CONGRATULATIONS Congratulations on your purchase of the Pendule Cradle Swing “Trios” This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
Page 5
Leg Tubes Seat Frame Top Seat Frame Toy Bar (with 3 Bottom (vibration x soft toys pre- module pre- assembled) assembled) USB Power Cable There are no accessories recommended for use with this Childcare Swing.
Page 6
ASSEMBLY / OPERATING INSTRUCTIONS To assemble Frame... Lay the Main Frame down on its side. Align one Leg Tube with the leg connection housing at the bottom of the Main Frame. Insert Leg Tube into the leg connection housing until it ‘clicks’ into place and the push- pins are secure.
Page 7
ASSEMBLY / OPERATING INSTRUCTIONS To assemble Seat Frame continued... Feed the Bottom Seat Frame (with vibration module pre-assembled) inside the bottom end of the seat liner. Ensure the vibration module is showing through the designated hole in the seat liner. Connect the top and bottom seat frames together via the push pins.
Page 8
ASSEMBLY / OPERATING INSTRUCTIONS To assemble Toy Bar... Align the Toy Bar with the slots at the front of the seat arm. Insert the Toy Bar into the slots until it ‘clicks’ into position. NOTE: Toy bar and toys should only be assembled by an adult.
Page 9
ASSEMBLY / OPERATING INSTRUCTIONS To operate Seat Adjustment... This swing has 2 seat recline positions. To adjust the swing recline positions, operate the seat adjustment buttons whilst tilting the seat to the desired position. Ensure the seat ‘clicks’ into position securely. To operate Seat Direction...
Page 10
ASSEMBLY / OPERATING INSTRUCTIONS To Power Swing Continued (Power Cable)... Insert power cable into the swings power input, located on the underside of the Main Frame leg connection housing. NOTE: Power cable will override battery power when plugged into the swing. If you are using the swing on battery power, disconnect the power cable from swing.
Page 11
ASSEMBLY / OPERATING INSTRUCTIONS To operate Auto Off Timer... This swing has 3 auto off timer settings that will turn the swing and musical melodies off automatically. Push the ‘auto off timer’ button: Once for 8 minutes. Twice for 15 minutes. Three times for 30 minutes.
HOW TO CARE FOR YOUR CHILDCARE SWING Cleaning To ensure the long-lasting use of your swing, dry it with a soft absorbent cloth after use. Use a damp cloth to clean the frame. Do not use abrasive cleaners. Allow it to dry completely before folding or storing it away.
Page 13
These include distribution lines for Evenflo, Good Baby, Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing...
Page 16
Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse Customer Service 1300 667 137 Distribution 2-6 Argyle St, Morningside, W: www.cnpbrands.com.au PO Box 41-014, E: info@cnpbrands.com.au St Lukes, Auckland, New Zealand F: www.facebook.com/CNPBrands Customer Service: 0800 567 5000 I: @cnp_baby E: helpline@wainhousedist.co.nz...
Need help?
Do you have a question about the Pendule Trios 037704-389 and is the answer not in the manual?
Questions and answers