C. RF input(ANT input)
1.Rod Antenna
(1)Install the rod antenna clockwise rotation (figure 1)
(2)Unin
stall the rod antenna anticlockwise movement
(1)
2.Use the Antenna adapter (IEC to F-type connect) to
connect outdoor Antenna
(1)Install the antenna adapter clockwise rotation (figure 1)
(2)Unin
stall the antenna adapter anticlockwise movement
(1)
(figure 2)
(2)
(figure 2)
(2)
6
D. POWER SUPPLY
AC Household Current:
The optional AC adaptor allows the TV to be powered by standard household
current (please look over the symbol of the AC adaptor.)
Car Battery (DC 12V):
The optional car adaptor (apply to the car with
ground) allows the TV to be powered by a car battery through the vehicle s
cigarette lighter.
E. BASIC OPERATION
Turning on power
Slide the MAIN POWER Located on
the back side of the main unit .
Selecting DTV/AV/ATV source
1)Turn on the power of the connected
video equipment.
2)Press the SOURCE button to select the
applicable input source .the screen
displays DTV/ AV/ATV mode at the
upper left corner each time SOURCE
is pressed.
NOTE:
NOTE:
If there is not signal, the screen will display :"NO SIGNAL"
-
polarity connected to the
ON-screen display
DTV mode
DTV
AV mode
AV
ATV mode
ATV
7