Table of Contents
Advertisement
button to go back to TV.
You can see the actual page number on the left side and t he
requested page number on the right side at the top of the teletext
page. The page searching is displayed on the left side.
Teletext is only available when receiving DVBT channels.
NOTICE:
This service is not offered by all channels. Teletext and subtitle information
will be available only when it is included in the transmission.
OTHER
Sound track
In digital broadcasts, multiple audio languages can be simultaneously
transmitted by the program provider. The Audio control menu appears
when the Audio key is pressed on the channel having different types
of sounds. You can change the desired audio language and audio mode
of current service.
I. ADJUSTING THE SLEEP TIMER SETTINGS
1. Press the SLEEP key to display the sleep time screen.
2. Press the LEFT/RIGHT(
The setting can be set in 10 . 20 . 30 . 40 . 50 . 60 ....... 200 .
210 . 220 . 230 . 240 minutes
J. LISTENING WITH A EARPHONE
Plug the earphone mini-plug into the earphone jack located on the rear side
of the set .
Earphone
Notes:
No sound will be heard from the main unit speakers when
connecting the earphone set.
/
) to set the sleep time (in minutes).
22
K. TROUBLESHOOTING
Before calling for repair service,cheak the following items for possible
remedies to the encoutered symptoms.
TV set
Problem
Make sure the AC adapter is properly
inserted in the power outlet.
There is no
Reception other than those of broadcasting
picture or
stations can be considered.
sound.
Make sure the input mode is set to TV.
Make sure the main power switch of the
main unit is on.
Make sure the colour system is right
There is no
Fluorescent lamp may have reached the end
picture.
of service life.
Make sure the sound system is right
There is no
Make sure the volume is not set to minimum.
sound.
Make sure the sound is not set to mute.
Make sure the headphone is not connected.
There is no
Make sure the antenna cable is properly
picture or
connected.
sound,just
Bad reception can be considered.
noise.
Make sure the antenna cable is properly
picture is
connected.
not clear.
Bad reception can be considered.
picture is light
or improperly
Check colour adjustment.(NTSC mode)
tinted.
Check Contrast and Brightness adjustment.
The picture is
Fluorescent lamp may have reached the end
too dark.
of service life.
Check to see if batteries in the remote control
Remote control
have sufficient power.
does not work.
Make sure the remote sensor window is not
under strong fluorescent lighting.
Check item
23
Advertisement
Table of Contents
