Hilti TE 5 Operating Instructions Manual
3-wire grounded construction
Hide thumbs
Also See for TE 5:
- Operating instructions (4 pages) ,
- Operating instructions manual (88 pages)
Related Manuals for Hilti TE 5
Summary of Contents for Hilti TE 5
- Page 1 *201315* Operating instructions TE 5 / TE 5-DRS 201315 Rotary Hammer Drill 3-Wire Grounded Construction Printed: 07.07.2013 | Doc-Nr: PUB / 5071017 / 000 / 00...
- Page 2 Safety precautions for 3 wire 14. Disconnect Tools. When not in use, before servicing and regulations. Repairs may only be carried out by an electrical spe- when changing accessories, such as blades, bits, cutters. cialist otherwise an accident hazard for the operator can exist. 15.
-
Page 3: Technical Data
Setting lever for hammer drilling/rotary drilling only Connections for dust removal system Right of technical modifications reserved. Accessories and kit for Hilti TE 5 rotary hammer: Hilti lubricant spray, TE5-DRS dust removal system, key-type chuck, quickre- lease chuck case or cardboard box Please refer to the respective regulations of your trade association and the Before starting to work, please read the enclosed safety precautions. -
Page 4: Before Beginning Work
Drilling without hammering action Dust removal: Adjust the setting lever to the rotary 1. Check that the electric supply corre- All TE 5 rotary hammer drills can be drililng position ( symbol). When equipped with a dust removal system sponds to the information on the rating set to this position, only the rotary plate. - Page 5 Depth gauge Length adjustment Plug-in drive coupling for extraction fan Kit supplied with TE 5-DRS: Case or cardboard box, cover for dust container, D12 extraction head, D17.5 extraction head TE 5-DRS accessories: Dust container with cover and folded filter Riqht of technical modifications reserved...
- Page 6 required for anchors. Clean out the away from the machine. Tap the con- Assembly/disassembly anchor holes according to the instruc- tainer lightly when emptying. Replace Fig.1+2: Drive coupling principle tions for the anchors used. the container by sliding it in from below The built-in extraction fan in the dust until a definite click is heard.
-
Page 7: Warranty
Warranty Hilti warrants that the tool supplied is free of defects in material and work- manship. This warranty is valid as long as the tool is operated and handled correctly, cleaned and serviced proper- ly and in accordance with the Hilti...
Need help?
Do you have a question about the TE 5 and is the answer not in the manual?
Questions and answers