Advertisement
OPTIONAL STEPS FOR HEADBOARD
Should you decide to use your new platform base with a headboard,
the required hardware is already provided with the pack you received.
st
1
STEP:
Take the headboard bracket (K) provided with the hardware pack
of your base and identify which holes on the bracket corresponds
to the attachment holes on your headboard.
nd
2
STEP:
Once you have identified the matching holes, put 1 carriage bolt (O)
in each matching hole (In the illustration below, the washer (P) and
nut (N) are used to keep the carriage bolts in place only)
Advertisement
