Mounting The Main Unit - Philips HTS8100 User Manual

A
E
F
G

Mounting the main unit

CAUTION!
Risk of personal injury and damage
to the unit. Allow only qualifi ed
persons to mount the unit.
Before you start ...
Make sure that all cables have been
connected to the main unit.
A
Attach the supplied knobs to the rear of
the main unit.
B
Turn the main unit over so that the
bottom of the main unit faces up.
C
While you hold the main unit fi rmly with
one hand, grasp one of the rubber
speaker feet and push it towards the back
of the main unit.
Optional Connections
C
B
H
D
Repeat step three to remove the other
speaker foot.
E
Position and mark the supplied bracket
where you intend to mount the main
unit.
F
Drill the screw holes.
G
Insert the rubber wall plugs (not
supplied) into the holes.
H
Secure the bracket onto the wall with the
screws (not supplied).
I
Hook the main unit fi rmly onto the
mounted bracket. Slide the knobs
through the bracket's key holes and lock
into position.
Helpful Hint:
– To mount the main unit below your TV,
leave at least 10cm (4 inches) of space
between the TV and the bracket.
(continued)
D
I
19