Switching Camera Angles; Black Level; Noise Reduction; Philips Wireless Mediaconnect - Philips HTS5506/F7 User Manual

• [AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If the disc has no audio language, "Not Available" will be
displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
• You can also change the audio setting from the play
menu. Play menu can be called up by pressing
[OPTION].

8.13. Switching Camera Angles

Some BD-videos and DVD-videos contain scenes which
have been shot simultaneously from various angles. You can
change the camera angle when
screen.
1. During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2. Use [ ] to select your desired angle.
3. Press [BACK ] to exit.
D Note
• If "Angle Icon" setting is set to "Off",
appear on the TV screen. (refer to page 39)
• You can also change the angle setting from the play
menu. Play menu can be called up by pressing
[OPTION].

8.14. Black Level

You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
"On" or "Off".
1. During playback, press [OPTION] to display the play
menu.
2. Use [ ] to select "Black Level", then press [OK].
3. Use [ ] to select your desired setting.
e.g.) Blu-ray Disc™
Black Level
:
"On" Makes the dark parts blacker with additional
contrast and brightness.
:
"Off" Shows the original picture as recorded.
4. Press [BACK ] to exit.
EN - 34
appears on the TV
will not
On
D Note
• The setting will remain the same even if the unit is
switched to standby mode.
• "Black Level" is not effective under the following
conditions.
- When the picture is output from HDMI OUT jack.

8.15. Noise Reduction

Reduces the noise of the playback picture.
1. During playback, press [OPTION] to display the play
menu.
2. Use [ ] to select "Noise Reduction", then press
[OK].
3. Use [ ] to select your desired setting.
e.g.) Blu-ray Disc™
Noise Reduction
:
"On" Activates noise reduction.
:
"Off" Deactivates noise reduction.
4. Press [BACK ] to exit.
D Note
• The setting will remain the same even if the unit is
switched to standby mode.

8.16. Philips Wireless MediaConnect

With this feature, you can enjoy your TV as a PC monitor
wirelessly using your home network. Make sure you
download the Philips Wireless MediaConnect software and
install it on your PC before you perform the steps below.
Install Philips Wireless MediaConnect
1. Press [ (home)] on the Blu-ray Disc™ Home Theater
System remote.
2. Use [
[OK].
3. Use [ ] to select "Network Setup", then press
[OK].
4. Use [ ] to select "MediaConnect", then press
[OK].
• Write down the 12-digit code displayed on the
screen. You will need this to download
MediaConnect software.
5. Start your Internet browser on your PC and open the
Philips Wireless MediaConnect download page at
www.wifimediaconnect.philips.com
you can check the necessary PC system requirements.
6. Enter the 12-digit code you wrote at step 4 and
download the MediaConnect software.
Off
] to select "Setup", then press
On the website,