VTech Go! Go! Smart Wheels User Manual page 11

3. Assemble the curved track: Attach the track support to the big
curved track. Then, attach the curved track to the police station as
shown below. Insert the gate into the big curved track.
4. Assemble the spinning disc: Put the traffic light into the hole at
the center of the spinning disc and attach the disc to the bottom of
the big curved track. Attach the exit track to the spinning disc.
5. Assemble the spinning gate: Locate the
spinner and insert it into the gate archway
as shown. Place the fully assembled spinning
gate onto the spinning gate track piece.
6. Assemble the fire station: Slide the elevator onto the groove on
the side of the fire station building. Then, attach the fire station
building to the station base as shown.
196000IM.indd 10
10
2016/5/13 15:06:57