Record Plan; Sensor Setup（Not Available; Network Setup - Faittoo FT-AVR2204H Manual

HD Hybrid 5 in 1 DVR Manual V1.1

4.14.3.1 Record plan

More detail refer to "4.13.2 Record Plan"
4.14.3.2 Sensor Setup（Not available）

4.14.4 Network Setup

4.14.4.1 Network setup
Operation steps:
Please right click the main menu"System Setup"->"Network setup",then get setting interface as below:
Detailed functions:
Function Type Description
DHCP Automatically obtain IP,If choosing this function,
users get IP address of the device automatically,
otherwise it is set manually.
Cloud(P2P) To show Cloud ID of the device.
IP address For displaying IP address of the device. If users
want to change IP address, they can manually
enter the IP address.
Subnet Mask For dispalying the subnet mask of the device.
Gateway For displaying the device's gateway address.
MAC Address For displaying the hardware address information of
the device.
Preferred DNS Set to be consistent with the router's DNS
Web Port For setting web port, which is used for data
transmission when remote monitoring. When this
port is disabled or occupied, users have to change
this value.
Cloud(P2P) To show Cloud ID of the device.
Network status It is used for show Network status
Illustration
http://www.faittoo.com
Figure 4-46
40
sevice@faittoo.com
Remark
If choosing this function,
users can't change
address.
Failure to connect the
network will show "offline".
The default IP address is
192.168.1.114
Failure to connect the
network will show "offline".
IP