Lubrication; Transporting The Machine; Storing The Machine - Hakki Pilke Eagle Manual

6. Adjust the stopper of the stop
block so that it is in contact with
the brake pad as shown in figure
1 on page 19, and tighten the
bolts. Test that the machine and
the emergency stop device
operate properly! See page 13!

Lubrication

Wear appropriate protective clothing to protect your skin when handling lubricants. Handle
lubricants appropriately in order to prevent environmental contamination.
Lubricate the points marked with the following yellow symbol with grease
every 100 operating hours.

Transporting the Machine

When transporting the machine with a tractor:
- Adjust the cross-cut cradle extension to its shortest position.
- During transport, ensure that the machine does not knock against or collide with other
machinery, vegetation, persons, animals, buildings, or other structures along the route.
- Keep the machine at such a distance from the ground that its frame cannot collide with
stones, stumps, or other obstacles.
- Transport the machine at a safe speed to prevent damage to the machine or tractor.
- Never carry any extra items on top of the machine during transportation.
- Always lower the machine to the ground during breaks en-route, even for short breaks, and
especially when leaving the tractor cab unmanned.

Storing the Machine

Hakki Pilke Eagle
24 (29)
7. Fasten the angular gear cover
with the mounting bolts (4 pcs).
Translation Version 5