Philips HSB4352 User Manual page 33

• Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
• Press OPTIONS to exit the system setup
menu.
• Disable the password for parental control
or change the rating level.
• Moisture has condensed inside the system.
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
• As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control is
operated.
Poor radio reception
• Increase the distance between the unit and
your TV or VCR.
• Fully extend the FM antenna.
• Connect an outdoor FM antenna instead.
Unable to select Progressive Scan
• Ensure the component video mode is set
to [YUV].
No sound on HDMI connection.
• You may not hear any sound if the
connected device is non-HDCP compliant
or only DVI-compatible.
Audio or subtitle languages cannot be set
• The disc is not recorded with sound or
subtitles in multiple languages.
• The audio or subtitle language setting is
prohibited on the disc.
34 EN