Table of Contents
Advertisement
Chapter 4: Chassis Setup and Maintenance
3. Plug the end of the LED power cable into the JCHLED1 header on the
Supermicro C7Z87-OCE motherboard as illustrated in figure 4-12.
NOTE: If you are using a different motherboard than the Supermicro C7Z87-
OCE motherboard, skip ahead to Step 4 and use the table at the bottom of
page 4-14 to configure the LED display for a single color.
1
4
Connect the LED Power
Cable to the JCHLED1
header on the Supermicro
C7Z87-OCE Motherboard
Figure 4-12: Connecting to the Supermicro C7Z87-OCE Motherboard
4-13
Advertisement
Table of Contents
